Code Colour Short Description Description Packaging 027503 black DIMMER ART.1002 NE Electronic Dimmer item 1002 50 pieces 027504 white DIMMER ART.1002 BI Electronic Dimmer item 1002 50 pieces 027505 transparent DIMMER ART.1002A TR Electronic Dimmer item 1002A 50 pieces Rewirable electronic dimmer for cord sets. Technical data: rated voltage: 23O V a.c. 50 Hz dimmable power (lamp load): 10 ÷ 150 W MOSFET technology. Power on signal LED. The lamp is switched on and off in a gradual manner to avoid dazzling the user and unnecessary stress on the incandescent lamp filament. Silent operation: new technology avoids noises produced by traditional dimmers. Dimmer has fused protections against over-voltage and mains peaks following EN 61000-3-3. Button commands: continous pressure adjusts the intensity of the light from a minimum to a maximum, with a pause at minimum and maximum of about one second brief pressure (less than a second) turns on the light at the previous chosen level, or turns it off; the chosen intensity of light is memorised, even if there is no mains voltage. On demand: different max power (60W and 120 W) versions. Changes to the timing are available on demand for large quantities. Suitable for round and flat cables. Item 1002 dimmer is supplied with: electronic board with screw terminals, upper body, lower plastic body with cord grip plates, button and no.2 screw. Wires must be prepared with 5 mm cable finish, 12 mm stripping and be connected to the electronic board by screw terminals; electronic board snaps in lower plastic body; plastic bodies must be assembled by screws. ENEC 03 approved Availability: September 2005 A new release of the electronic board to control power LEDs is planned. Currency: USD Unit Price: Quantity: Delivery: